intermediate

How to Strip Paint From Resin Miniatures Without Destroying the Print

Most paint stripping advice is written for injection-molded plastic and metal, and some of it will ruin a resin print. Here is the resin-safe method, the solvents to avoid outright, and how to scrub a brittle model without snapping it.

painting-finishing
→
beginner

How to Dispose of Resin Printing Waste Safely: Failed Prints, Dirty IPA, and Empty Bottles

Resin printing produces more kinds of waste than most people plan for. Here is the universal rule that covers all of it, a session-end routine that keeps it from piling up, and how to find out what your own municipality actually wants you to do.

printing-tutorials
→
beginner

Airbrush Priming 3D Printed Miniatures: Thinning, PSI, and a Clean Finish

An airbrush gives you a thinner, more controlled primer coat than any rattle can, which matters on resin prints where the detail is sharp and easy to bury. Here is how to thin primer correctly, what pressure to run, and how to clean up so the airbrush works next time.

painting-finishing
→
beginner

Resin Printer Ventilation in an Apartment: Fume Management Without a Garage

Most resin ventilation advice assumes a garage, a basement, or a window you are allowed to modify. Here is how to actually manage resin fumes in an apartment or a spare bedroom, what each option is worth, and where the limits are.

printing-tutorials
→
intermediate

Resin Printer Enclosures: Pre-Built, Detolf, or DIY

An enclosure holds heat, contains odor, and keeps ambient UV off your vat. Here's what each of the three common approaches actually costs, what they get wrong, and how to size and ventilate one without turning a fume problem into a fire problem.

printing-tutorials
→
intermediate

How to Fix Elephant Foot and First-Layer Problems on Resin Prints

Elephant foot is a bottom-layer exposure problem, not a general exposure problem. Here's how to tell it apart from adhesion failure, how to fix it with bottom exposure and transition layers, and why lifting the model off the plate solves it permanently.

printing-tutorials
→
intermediate

How to Fix Layer Lines and Banding on Resin Prints

Layer lines, banding, and layer separation are three different defects with three different causes. Here's how to tell them apart by measuring the spacing, and how to fix each one in the right order.

printing-tutorials
→
intermediate

How to Magnetize 3D Printed Miniatures for Weapon Swaps and Loadouts

Magnetizing printed miniatures so arms, weapons, heads, and turrets swap cleanly. Magnet sizing, drilling brittle resin without cracking it, and a polarity system that stops you gluing a magnet in backwards.

printing-tutorials
→
beginner

Resin Printing Glossary: Terms Every Hobbyist Should Know

Plain-language definitions for the resin printing terms that come up constantly in guides, forums, and slicer menus, so you stop having to Google mid-session.

printing-tutorials
→
intermediate

How to Print Resin Dungeon Terrain Tiles

Printing dungeon tiles in resin is not like printing miniatures. How orientation, resin choice, magnets and batch washing change for modular DnD terrain.

printing-tutorials
→
intermediate

Resin Printer LCD Screen Replacement Guide

How to tell a failing MSLA LCD screen from an exposure problem, replace it on an Elegoo or Anycubic printer, and why you have to recalibrate exposure afterward.

printing-tutorials
→
intermediate

How to Fix a Broken Resin Miniature: Gluing, Pinning, and Hiding the Repair

Resin snaps clean instead of bending. Here is how I glue, pin, fill, and repaint broken miniatures so the repair holds up to actual play and disappears under paint.

painting-finishing
→
intermediate

Resin Printing in Cold Weather: How to Print Miniatures in an Unheated Garage or Basement

Cold resin fails in ways that look like a hundred other problems. Here's what temperature actually does to a print, how I keep my Saturn running through a Tennessee winter, and the settings that need to change when the room drops below 70F.

printing-tutorials
→
intermediate

Resin Exposure Test: How to Calibrate Exposure Time for Sharp Miniatures

Every new bottle of resin needs its own exposure time. Here's the test print process I run on my Saturn, what over- and under-exposure actually look like on a 28mm mini, and how to dial in the number in one print.

printing-tutorials
→
beginner

How to Clean a Resin Printer Vat Safely

Routine drain-downs, lifting cured resin off the FEP, and the mistakes that scratch a vat. The exact process I use on my Saturn, step by step.

printing-tutorials
→
intermediate

How to Orient Resin Miniatures for Printing: Angle, Support Scars, and Suction

I tilt every resin miniature 30-45 degrees, rotate scars off the face, and check for suction traps before I hit slice. Here's my full orientation process.

printing-tutorials
→
beginner

How to Resize and Rescale STL Miniatures for Resin Printing

How to scale STL miniatures to 28mm or 32mm, match an existing army, keep base sizes right, and avoid the detail loss and support problems that scaling causes.

printing-tutorials
→
beginner

How to Cure Resin Miniatures: UV Times

UV cure times by resin type, why water and temperature change the result, the budget nail-lamp method, and how to tell a mini is fully cured.

printing-tutorials
→
beginner

Resin Printer Pre-Print Checklist: 9 Checks

A 60-second pre-flight checklist that prevents the six-hour failed prints. The nine things worth checking before every miniature print, and why each one matters.

printing-tutorials
→
beginner

How to Print Resin Miniatures for Board Games: Gloomhaven, Frosthaven, and Beyond

Upgrade your board game minis with resin prints: scaling, batch printing a full cast on a Saturn plate, durable resins, and fast paint for table play.

printing-tutorials
→
intermediate

How to Paint Faces on Resin Miniatures: A Step-by-Step Technique Guide

Resin faces are sharper than cast plastic but the technique is different. This guide walks through basecoating, washing, layering, and adding eyes on 3D printed resin miniature faces: from beginner-friendly contrast shortcuts to the full layering method.

painting-finishing
→
beginner

IPA vs Resin Cleaners for Washing Minis

IPA is the default, not always the best. What each wash medium costs, where water-washable resin really fits, and when to stop reusing your alcohol.

materials-supplies
→
beginner

How Much Resin Does a Miniature Print Use?

Size-based resin use estimates for miniatures, with worked cost math and slicer tips for estimating before you hit print.

materials-supplies
→
intermediate

Hollow Resin Minis in Lychee and Chitubox

How to hollow resin miniatures in Lychee and Chitubox: wall thickness, drain hole placement, infill, and the trade-offs that matter for tabletop printing.

printing-tutorials
→
advanced

Wet Blending and NMM for Resin Miniatures: Advanced Technique Guide

Resin's smooth surface changes how wet blending and non-metallic metal painting work compared to cast plastic or metal. Here's the advanced technique for painters who have mastered contrast and drybrushing and want the next level.

painting-finishing
→
beginner

Speed Painting an Army: Contrast Paints and Drybrushing for Resin Minis

You printed 40 minis. Now what? The zenithal prime to contrast paint to drybrush workflow gets a full army to tabletop quality in hours, not weeks. Real batch sequencing, real time estimates.

painting-finishing
→
intermediate

Best Resin for Painters in 2026: Which Resins Take Primer and Hold Detail Under Paint

Most resin guides rank by print quality. This one ranks by what happens after: primer adhesion, paint behavior, and how well the finish survives a game night.

materials-supplies
→
beginner

Miniature Storage and Transport: Protecting Your Resin Collection

Foam cases, magnetic bases, and varnish-first rules for getting resin miniatures to game sessions without losing an arm or a weapon tip. What to buy, what to skip, and why varnish is not optional before transport.

painting-finishing
→
beginner

Pre-Supported vs. Unsupported STL Miniatures: What the Difference Actually Means for Beginners

Pre-supported STL files save time but limit control. Unsupported files give you flexibility but require skill. Here's how to decide which to download, and when each option makes sense.

stl-sources
→
beginner

How to Zenithal Prime Resin Miniatures

Zenithal priming adds light and depth to a resin miniature before any paint. The black, gray and white spray pattern, common mistakes, and why it works.

painting-finishing
→
beginner

Chitubox Support Settings for Miniatures

Exact Chitubox settings for miniatures: 0.05mm layers, anti-aliasing on, exposure times by resin type, support density, and hollowing thresholds that work.

printing-tutorials
→
beginner

Why Your Resin Miniature Print Failed: 10 Common Causes and Fixes

Resin stuck to FEP, supports detaching, melted detail, warped bases: 10 miniature print failures diagnosed by symptom with exact settings fixes for each.

printing-tutorials
→
beginner

Using Contrast Paints on 3D Printed Resin Miniatures: Tips for Better Results

Contrast paints are a natural fit for resin minis, but resin surfaces behave differently from injection-molded plastic. Primer choice, surface prep, and application tips specific to printed models.

painting-finishing
→
beginner

Drybrushing Resin Miniatures: Technique Adjustments for Smooth Printed Surfaces

Drybrushing works differently on 3D printed resin than on cast plastic. Here's how to adapt the technique for resin's smoother surface and still get sharp, natural-looking highlights.

painting-finishing
→
beginner

How to Base 3D Printed Miniatures

Texture paste, sand, static grass, and printed custom bases: four ways to finish a base, plus the basing mistakes that spoil a good paint job.

painting-finishing
→
beginner

How to Varnish and Seal Resin Miniatures

Resin miniatures chip without varnish. How to apply matte, satin and gloss varnish by spray or brush without frosting or clouding, and how to fix frosting.

painting-finishing
→
beginner

How to Remove Support Marks from Resin Miniatures Before Painting

Clean support nubs, pock marks, and scars off resin miniatures before primer. Tools, timing, and the fill technique that hides the damage for good.

painting-finishing
→
beginner

Resin 3D Printing Safety for Home Hobbyists: Ventilation, Gloves, and Disposal

Resin is a skin irritant and potential sensitizer. Here's what you actually need for safe resin printing at home: ventilation, PPE, disposal, and the risks people underestimate.

materials-supplies
→
beginner

Water-Washable Resin for Miniatures: Is It Actually Worth It?

Water-washable resin sounds like the obvious choice for home hobbyists. The reality is more complicated. Here's what it actually trades off, and when it makes sense for miniature printing.

materials-supplies
→
beginner

Lychee Slicer Settings for Miniatures: The Settings That Actually Matter

Specific Lychee slicer values for resin miniatures: layer height by print type, exposure by printer class, AA level by resolution, and support settings that reduce failures on thin features.

printing-tutorials
→
beginner

How to Replace FEP Film: Elegoo & Anycubic

When to replace FEP film, what to buy, and the full swap on Elegoo and Anycubic resin printers step by step, plus the tension check that most guides skip.

printing-tutorials
→
intermediate

ChituBox vs. Lychee for Pre-Supported STL Files: What You Need to Know

Pre-supported STL files behave differently in ChituBox and Lychee. Here's how the two slicers handle imported supports, where each one causes problems, and which settings actually matter when you're not placing your own.

printing-tutorials
→
beginner

How to Add Supports for Resin Miniature Printing

Manual vs auto-supports in ChituBox and Lychee Slicer, with practical placement tips for miniatures. Stop failing prints before they start.

printing-tutorials
→
beginner

How to 3D Print Resin Miniatures: The Complete Beginner's Guide (Start to Painted Mini)

Everything you need to go from zero to finished, painted miniature: printer setup, resin selection, slicing, printing, washing, curing, and painting prep.

printing-tutorials
→
beginner

How to Paint 3D Printed Resin Miniatures: From Wash to Highlight (Beginner Guide)

A step-by-step painting guide built specifically for 3D printed resin miniatures, covering surface prep, primer, basecoat, wash, and highlight for beginners.

painting-finishing
→
beginner

Resin Printing Your First Miniature

Everything you need to know to go from unboxed printer to finished print: exposure settings, support basics, curing, and cleanup.

printing-tutorials
→