This article contains affiliate links: I may earn a small commission at no extra cost to you.

Your brushes matter more than your paint. I say that as someone who spent two years blaming paint consistency for results that were entirely the fault of a splayed, paint-clogged brush I refused to throw away. Good paint through a bad brush looks bad. Mediocre paint through a brush that holds a point looks fine. If you have a fixed budget and you are standing in front of both, buy the brush.

The complication is that brush advice in this hobby skews toward the top of the market, where a single sable detail brush costs more than a bottle of resin. Some of that is justified and some of it is not, and the difference depends almost entirely on which job the brush is doing. This piece sorts out which is which. If you are earlier in the process and want the whole painting workflow rather than the shopping list, start with the complete guide to painting 3D printed miniatures.


What Actually Makes a Miniature Brush Good

Four parts, and only three of them matter to you:

The tip is the point. A good brush comes to a single fine point when wet and returns to it after a stroke. That return is called snap, and it is the single property that separates a brush worth $25 from a brush worth $3.

The belly is the body of the brush that holds paint. This is the part beginners ignore and then wonder why they are reloading every four seconds. A bigger belly means longer strokes and fewer trips to the palette, which means smoother results, because every reload is a chance to lay down a visible edge.

The ferrule is the metal band. Nothing good happens here. Paint that works its way up into the ferrule dries, swells, and pushes the hairs apart permanently. A splayed brush is almost always a ferrule problem, not a wear problem, and it is self-inflicted.

The handle is a handle. Ignore marketing about ergonomic handles.

The practical takeaway is that brush quality is mostly about point retention and paint capacity, and that you destroy brushes from the ferrule down, not the tip up.


Sable vs Synthetic: The Only Spec Argument Worth Having

Kolinsky sable is natural hair. It holds substantially more paint than synthetic, comes to a finer point, and snaps back to that point reliably. It is also expensive, somewhat fragile chemically, and in the US it has been subject to import restrictions over the years that make availability and pricing inconsistent. If you see a size 1 Series 7 at a normal price, that is the time to buy it.

Synthetic is cheaper, stiffer, and loses its point sooner. It is also the correct choice for a surprising number of jobs. Metallic paints are abrasive and will chew through sable. Washes and contrast paints get everywhere and are hard on a brush. Drybrushing is, mechanically, the deliberate abuse of a brush against a hard surface.

So the real rule is not “sable is better.” It is:

Painters who buy one expensive sable brush and then use it for everything get about three months out of it and conclude sable is a scam. Painters who buy one sable brush and protect it from metallics get years.


The Recommendations

The One Brush Worth Real Money: Winsor & Newton Series 7, Size 1

The Series 7 is the reference standard, and it got there honestly. It was designed as a watercolor brush and adopted by miniature painters because the point and the reservoir are both excellent. A size 1 is the sweet spot: fine enough for eyes and edge highlights, with enough belly that you are not reloading constantly.

Expect somewhere in the $25 to $35 range depending on size and where you buy. That is a genuinely uncomfortable price for one brush, and it is still the upgrade I would make first. The difference between this and a $4 synthetic on a face is not subtle.

The thing nobody tells you: buy it in size 1, not size 0. Beginners reach for the smallest brush available because the work is small, and then fight a brush with no paint capacity. A size 1 Series 7 comes to a point as fine as most size 0 synthetics while holding several times the paint.

Best for: Faces, eyes, edge highlights, freehand, blending. Everything where the point matters.

Do not use it for: Metallics. Ever. Not once.


Best Starter Set: Army Painter Mega Brush Set

If you are starting from zero, a set from Army Painter gets you a usable spread of sizes for roughly the price of one sable brush. The quality is fine. Not inspiring, but fine. Points are decent when new and degrade predictably over a few months of regular use, which is exactly what you want from brushes you are going to learn on.

Keep these in rotation for the jobs that are hard on a brush. Metallic trim, washes, slapping down a basecoat on a vehicle. The brushes you are willing to ruin are as important to a painting setup as the brushes you protect.

Best for: Learning, basecoating, metallics, washes, and anything you would rather not do with an expensive brush.


Best Dedicated Drybrush: Citadel Large Drybrush

Drybrushing is the one technique where a purpose-built brush genuinely outperforms a repurposed one. You want a flat, stiff, blunt head that catches raised detail without pushing paint into recesses. A worn-out round brush does the job badly; a dedicated drybrush does it well and costs very little.

Citadel’s brushes are generally overpriced for what they are, with the drybrush line as the exception. Drybrushes are consumable by design, so paying a small premium for a head shaped correctly for the job is reasonable. Any stiff flat brush works if you have one, but do not use sable, and do not plan on the brush surviving.

Drybrushing is also the single highest-return technique on resin prints, because it reads layer detail and sculpted texture better than almost anything else. The drybrushing guide covers the actual motion, which matters more than the brush does.

Best for: Texture, armor, fur, stone, metal edges, terrain. Fast results on resin.


The Enthusiast Alternative: Raphael 8404

Worth knowing about even though I am not linking a specific listing for it. The Raphael 8404 is the other Kolinsky sable brush that serious painters argue about, and the common claim is that it carries a longer belly and a larger paint reservoir than an equivalent Series 7, often at a lower price. Plenty of competition painters prefer it, usually in size 2.

I have not run one long enough to have a real opinion, and I would rather say that than pretend otherwise. If you already own a Series 7 and want to try the other school of thought, search current Raphael 8404 listings and buy size 2. If you own neither, start with the Series 7 size 1, because it is the easier brush to learn on.


Comparison

BrushHairBest JobRough PriceLifespan
W&N Series 7, size 1Kolinsky sableDetail, faces, highlights$25--$35Years, if protected
Army Painter setSyntheticBasecoats, metallics, washes$20--$30 for the setMonths per brush
Citadel drybrushSynthetic, stiff flatDrybrushing, texture$8--$12Consumable
Raphael 8404, size 2Kolinsky sableDetail, blending$18--$30Years, if protected

Which Sizes You Actually Need

Three, and one of them is not a round brush.

Size 1 round (sable). Your detail brush. Faces, eyes, highlights, freehand. This is the one that justifies spending money.

Size 2 round (synthetic). Your workhorse. Basecoats on infantry, washes, metallics, large areas of a single color. Bigger than feels intuitive, which is the point.

A flat drybrush. Texture and raised detail.

That covers probably 90 percent of a tabletop paint job. Things I would add only once you hit the limit:

What I would skip: brush sets with eight sizes in them. You will use three and the rest will sit in a jar. Starter sets are the exception, because at that price the spread is how you work out which three you actually reach for.


How to Not Destroy a Brush in Three Weeks

More value here than in any upgrade. Every one of these I learned by ruining a brush.

Never load paint past the halfway point of the belly. Paint that reaches the ferrule is the end of the brush. This is the rule. Everything else is secondary.

Rinse before the paint sets, not after you finish. Acrylic dries fast, and it dries fastest in the thin film at the heel where you cannot see it. Rinse during the session, not just at the end.

Never leave a brush standing in water. It bends the hairs at the heel and the bend is permanent. Lay it flat or store it upright with the tip in the air.

Use brush soap, not just water. Water does not remove dried acrylic from the heel. A brush soap or conditioner does, and it will roughly double the useful life of a sable brush. This is a $10 purchase that protects a $30 brush.

Reshape the point while wet, then leave it alone. Pull it gently to a point after cleaning. Do not stuff it into a jar with twenty other brushes.

Thin your paints properly. Thick paint is harder on a brush than thin paint, because it needs more pressure to move, and pressure against a hard surface is what splays hairs. A wet palette helps a lot here: it keeps paint at a workable consistency instead of thickening on you mid-session, which means less pressure and fewer reloads. It is the cheapest thing on this page that will visibly improve your results.


Common Questions

Is a $30 brush really better than a $4 brush? For detail work, yes, and visibly so on the first face you paint. For basecoating a tank, no, and the $4 brush is the correct tool. The expensive brush buys you point retention and paint capacity, which only matter when you are placing paint precisely.

Can I just use cheap brushes for everything? You can, and plenty of people do. What you give up is eyes, crisp edge highlights, and smooth blends. If your painting is table-standard batch work for gaming, cheap synthetics plus good technique will get you most of the way. If you want one display piece to look genuinely good, buy one sable brush.

Do I need brushes if I airbrush? Yes. An airbrush handles priming, basecoats, and zenithal work, and it does none of the detail. The two are complements, not alternatives. If that is the direction you are heading, the beginner airbrush guide covers the entry point.

Why did my new brush split after a week? Almost certainly paint in the ferrule, and almost certainly from loading too much paint onto the brush. It is not a defect and it is not fixable.

Does resin need different brushes than plastic or metal minis? No. What resin needs is good priming, because paint adhesion on cured resin is less forgiving than on plastic. Brush choice is identical. The primer article covers that side.


Where Brushes Fit in the Rest of the Setup

Brushes are one leg of a three-leg stool, and the other two are worth getting right before you spend $30 on sable.

Primer first. Nothing you do with a brush survives bad adhesion, and resin is pickier than plastic about it. See the best primers for resin miniatures.

Paint second. The brush delivers the paint, but the paint decides the finish. The paint line comparison breaks down the major acrylic ranges.

Then brushes, and then technique, which outruns equipment faster than anyone selling equipment will tell you. The faces guide is the clearest test of whether the problem is your brush or your hand, and the speed painting guide is the one to read if you are facing down a printed army rather than a single hero model.

And you need something to practice on. Burning a good brush learning edge highlighting on a model you care about is a bad trade. Print a handful of throwaway models first: the free STL miniatures roundup has more than enough to ruin guilt-free.

If you buy one thing off this page, make it the Series 7 size 1, and then do not let it touch a metallic paint.