Tag
#supports
7 results
Guides
Resin Printing Glossary: Terms Every Hobbyist Should Know
Plain-language definitions for the resin printing terms that come up constantly in guides, forums, and slicer menus, so you stop having to Google mid-session.
How to Orient Resin Miniatures for Printing: Angle, Support Scars, and Suction
I tilt every resin miniature 30-45 degrees, rotate scars off the face, and check for suction traps before I hit slice. Here's my full orientation process.
Pre-Supported vs. Unsupported STL Miniatures: What the Difference Actually Means for Beginners
Pre-supported STL files save time but limit control. Unsupported files give you flexibility but require skill. Here's how to decide which to download, and when each option makes sense.
Why Your Resin Miniature Print Failed: 10 Common Causes and Fixes
Resin stuck to FEP, supports detaching, melted detail, warped bases: 10 miniature print failures diagnosed by symptom with exact settings fixes for each.
ChituBox vs. Lychee for Pre-Supported STL Files: What You Need to Know
Pre-supported STL files behave differently in ChituBox and Lychee. Here's how the two slicers handle imported supports, where each one causes problems, and which settings actually matter when you're not placing your own.
How to Add Supports for Resin Miniature Printing
Manual vs auto-supports in ChituBox and Lychee Slicer, with practical placement tips for miniatures. Stop failing prints before they start.
Resin Printing Your First Miniature: Complete Beginner Guide
Everything you need to know to go from unboxed printer to finished print: exposure settings, support basics, curing, and cleanup.