Tag
#priming
5 results
Guides
Airbrush Priming 3D Printed Miniatures: Thinning, PSI, and a Clean Finish
An airbrush gives you a thinner, more controlled primer coat than any rattle can, which matters on resin prints where the detail is sharp and easy to bury. Here is how to thin primer correctly, what pressure to run, and how to clean up so the airbrush works next time.
How to Paint Faces on Resin Miniatures: A Step-by-Step Technique Guide
Resin faces are sharper than cast plastic but the technique is different. This guide walks through basecoating, washing, layering, and adding eyes on 3D printed resin miniature faces: from beginner-friendly contrast shortcuts to the full layering method.
How to Zenithal Prime Resin Miniatures
Zenithal priming adds light and depth to a resin miniature before any paint. The black, gray and white spray pattern, common mistakes, and why it works.
How to Remove Support Marks from Resin Miniatures Before Painting
Clean support nubs, pock marks, and scars off resin miniatures before primer. Tools, timing, and the fill technique that hides the damage for good.