Tag
#elegoo
10 results
Guides
Resin Printer LCD Screen Replacement: How to Spot a Dying Screen and Swap It
The LCD in an MSLA printer is a consumable, not a permanent part. Here's how to tell a failing screen apart from an exposure problem, how to replace it on an Elegoo or Anycubic machine, and why you have to recalibrate afterward.
Resin Printing in Cold Weather: How to Print Miniatures in an Unheated Garage or Basement
Cold resin fails in ways that look like a hundred other problems. Here's what temperature actually does to a print, how I keep my Saturn running through a Tennessee winter, and the settings that need to change when the room drops below 70F.
Resin Exposure Test: How to Calibrate Exposure Time for Sharp Miniatures
Every new bottle of resin needs its own exposure time. Here's the test print process I run on my Saturn, what over- and under-exposure actually look like on a 28mm mini, and how to dial in the number in one print.
How to Clean Your Resin Printer's Vat and FEP Film (Without Wrecking It)
The vat is the part beginners are most afraid to touch and most likely to damage. Here's how I clean mine on the Saturn: routine drain-downs, cured-resin removal, and FEP care, without a single scratch.
How to Print Resin Miniatures for Board Games: Gloomhaven, Frosthaven, and Beyond
Upgrade your board game minis with resin prints: scaling, batch printing a full cast on a Saturn plate, durable resins, and fast paint for table play.
Best Resin for Painters in 2026: Which Resins Take Primer and Hold Detail Under Paint
Most resin guides rank by print quality. This one ranks by what happens after: primer adhesion, paint behavior, and how well the finish survives a game night.
Articles
Elegoo Saturn 4 Ultra Review: Is 16K Overkill for Tabletop Miniatures?
An honest Elegoo Saturn 4 Ultra breakdown built from specs, manufacturer data, and reviewer-reported performance. Is 16K overkill for the tabletop, or does the resolution actually earn its price?
Aug 3, 2026Best ABS-Like Resin for Tabletop Miniatures: Tougher Prints That Survive the Table
ABS-like resins compared for durability: Siraya Tech Blu, Elegoo ABS-Like Pro, Anycubic ABS-Like Pro and more. Which actually survives being dropped, and how to print them.
Jul 27, 2026Mercury Plus 2.0 vs Phrozen CW3 vs Anycubic Wash & Cure 2.0: Which Station Is Worth Buying?
Head-to-head comparison of the three dominant wash and cure stations for resin miniature printing. Mercury Plus 2.0, Phrozen CW3, and Anycubic Wash & Cure 2.0: honest differences for miniature printers.
Jun 29, 2026Elegoo Saturn 4 Ultra vs Anycubic Photon Mono M7 Pro: Honest 2026 Side-by-Side for Miniature Painters
Elegoo Saturn 4 Ultra or Anycubic Photon Mono M7 Pro? Here's what the specs and reviewer-reported performance actually mean for miniature painters, and where the M7 Pro genuinely wins.
Jun 15, 2026